KRATKI INGA ECODESIGN 8KW (50-70M2) ΕΝΕΡΓΕΙΑΚΗ ΣΟΜΠΑ ΞΥΛΟΥ ΑΠΟ ΧΑΛΥΒΑ ΜΕ ΛΕΥΚΑ ΚΕΡΑΜΙΚΑ TERMOTEC

2950 €Καθαρή Αξία

3.658,00 Με Φ.Π.Α

Διαθέσιμο σε 5 με 9 εργάσιμες (Ανάλογα τη διαθεσιμότητα)

STEEL WOOD-BURNING STOVE INGA 8 KW Ø 150

INGA – EAN: 5903751143024
 
Inga is a modern wood-burning stove with a simple and elegant finish, with a three-sided vision of fire. The stove is enriched with a black steel handle for opening the door and a click-clack system to safely close the combustion chamber.

Κωδικός προϊόντος: INGA Κατηγορίες: ,

Περιγραφή

Inga is a modern wood-burning stove with a simple and elegant finish, with a three-sided vision of fire. The stove is enriched with a steel, black handle for opening the door and a click-clack system to safely close the combustion chamber.

ADVANTAGES

Three-sided vision of fire.

Fireplace paint resistant to high temperatures.

Glass ceramics with high heat resistance up to 660ºC.

Black frame around the glass to deepen the vision of the fire.

Double glazing on the sides increases the tightness of the combustion chamber and reduces heat radiation to optimise the wood burning process.

Lining of the combustion chamber with accumulation panels of a new generation Termotec – more efficient burning and longer temperature maintenance.

Deeper combustion chamber – to accommodate more wood.

Original door closing system click-clack – gives safety of closing and firm locking.

Clean glass system.

Possibility to install flue gas outlet fi 150 either from the top or from the back.

Removable grate and ash pan.

Suitable for homes with recuperation.

Adapted to connect the air intake from outside.

THE SET INCLUDES

INGA stove.

Grate.

Ash box.

Deflector.

Built-in damper.

Built-in inlet with diameter 125 mm.

MODERN DESIGN

Spacious glazing enhances the vision of the fire and the additional decorative glass with black non-screen printed glass highlights its charm.

The TERMOTEC lining inside contrasts perfectly with the body of the stove, giving the whole a modern look.

A solid handle makes it easy to close the door tightly. This makes the device ideal for use in homes with recuperation.

ECOLOGICAL COMBUSTION

The device meets the requirements of Ecodesign and BImSchV 2 standard determining the maximum CO emission.

MAXIMUM USE OF ENERGY

More efficient combustion and longer maintenance of temperature is possible thanks to lining the combustion chamber with TERMOTEC – a material accumulating heat, which increases the temperature in the furnace.

Afterburning of fuel particles takes place thanks to a deflector which extends the combustion path. This process also increases combustion efficiency and guarantees better use of energy, thus minimizing the emission of harmful substances into the atmosphere. In addition, on the exhaust outlet there is a shutter which performs a similar function to the deflector, which further increases the effects of the device.

The air is supplied from outside thanks to a built-in air inlet. The intake itself can be connected to the stove from the back or from below? It is adjusted by means of a throttle set with a single control, located below the door, which excludes errors in improper use. The entire mechanism works very quietly and trouble-free.

The fireplace stove is equipped with a triple system of airing the combustion chamber. The primary air, which makes it easier to ignite wood, is supplied under the grate. Secondary air – ensuring ecological combustion – is supplied through holes in the rear wall.

In addition, the stove uses a clean glass system (air curtain), i.e. the air is supplied directly to the glass through a system of ducts located on the sides of the fireplace. In this way oxygen is supplied to the upper part of the combustion chamber where gases produced during the wood combustion process are afterburnt, which additionally reduces CO emissions into the atmosphere.

SAFETY AT THE HIGHEST LEVEL

INGIA’s front is equipped with heat-resistant ceramics which can withstand temperatures up to 660°C. The glass offered by us is certified for quality and safety.

The body and front of the insert are resistant to high temperatures thanks to the use of high-quality steel. They also ensure stability of the entire construction.

An excellent tightness of the device is ensured thanks to solid welds made in a noble gas shield. Steel elements are laser cut using modern equipment and then bent on CNC bending machines.

COMFORTABLE USE

The stove uses a specially profiled bottom plate made of TERMOTEC material, thanks to which the combustion chamber is deeper and can hold more wood.

The stove is easy to keep clean thanks to a removable grate and a container for ash collection.

The glazing of the insert stays clean thanks to the clean glass system used in it. The air curtain separates the glass from the fireplace. Thanks to this it does not get dirty.

Επιπλέον πληροφορίες

Χρώμα

ΓΡΑΦΙΤΗΣ

Υλικό

ΧΑΛΥΒΑΣ

Τύπος σόμπας

STANDARD

Termotec

ΛΕΥΚΑ

Ενεργειακή κλάση

A

Τζάμι

STANDARD

Γωνία

ΤΡΙΩΝ ΟΨΕΩΝ